Epson WF-M1560 Quick Start Guide download pdf

Start Here

4 Load paper against the right edge guide and behind the

tab line on the left edge guide, with the printable side

faceup.

Caution: Don’t load the paper sideways; always load it short

edge first.

5 Slide the edge guide against the left edge of the paper,

but not too tightly.

6 Flip the feeder guard back.

Connect the fax line

To fax, connect a phone cord to a telephone wall jack and

to the LINE port on the back of your product. To connect a

telephone or answering machine, use the EXT. port on your

product. See the Quick Guide for more details.

Note: If you have a DSL or ISDN connection, you must connect

the appropriate DSL filter, or ISDN terminal adapter or router to the

wall jack to be able to use the line for faxing or voice calls using

your product. Contact your DSL or ISDN provider for the necessary

equipment.

Read these instructions before using your product.

Unpack

French control

panel stickers

(included for Canada only)

Caution: Do not open the ink cartridge package until you are ready to

install the ink. The cartridge is vacuum packed to maintain reliability.

Remove all protective materials, including from inside the printer.

Turn on

1 Connect the power cord to the back of the printer and to an

electrical outlet.

Caution: Do not connect to your computer yet.

2 Press the power button.

Select settings

1 To select English as your language, press OK.

If you want to change the language, press or to

select it, then press OK.

2 Select your country/region and press OK.

3 Select Summer if Daylight Saving Time is in effect;

otherwise, select Winter. Press OK.

4 Select the date format and press OK.

5 Press the number keys to enter the date and press OK.

6 Select the time format (12h or 24h) and press OK.

7 Press the number keys to enter the time. Then press or

to select AM or PM, if necessary.

8 Press OK.

Note: You can change the date and time settings using the printer’s

control panel. For more information, see the online User’s Guide.

Install ink cartridge

1 Lift up the scanner unit.

2 Shake the ink cartridge gently 4 or 5 times, then unpack it.

Caution: Don’t touch the green chip or small window on the

cartridge.

3 Remove only the yellow tape from the cartridge.

Caution: Don’t remove any other seals or the cartridge may leak.

4 Insert the cartridge in the holder, and press it down until

it clicks.

5 Lower the scanner unit.

6 Press OK to prime the ink delivery system. This takes

about 5 minutes.

Note: The cartridge included with the printer is designed for

printer set up and not for resale. After some ink is used for

priming, the rest is available for printing.

Caution: Don’t turn off the printer while it is priming or you’ll

waste ink.

Do not press the Wi-Fi Setup button

unless prompted during software installation.

Load paper

1 Flip the feeder guard forward.

2 Raise the paper support, pull out the output tray, then

raise the paper stopper.

3 Slide the edge guide to the left.

*412491400*

WF-M1560

1 2 3 4

Summary of Contents

Page 1 - *412491400*

Start Here4 Load paper against the right edge guide and behind the tab line on the left edge guide, with the printable side faceup. Caution: Don’t

Page 2

Start Here4 Load paper against the right edge guide and behind the tab line on the left edge guide, with the printable side faceup. Caution: Don’t

Page 3 - Any problems?

Connection optionsWireless connectionYou must install the software on every computer from whichyou want to print. For the ﬁrst installation, we recomm

Page 4 - Any questions?

RecyclingEpson offers a recycling program for end of life products.Please go to www.epson.com/recycle for information onhow to return your products fo