Epson TM-T82 User Manual download pdf (Page 109)

109

Chapter 4 TM-T82 Utility

Configure the [Print logo when paper is cut.].

* Because this cannot be used with some printer versions, it may not be displayed.

Click the [Set] button. The settings are reflected to the printer.

Setting Description

Top Logo Sets the logo that is printed at the top of the paper.

❏ Key-code: Selects the Key-code of the logo to be printed.

❏ Alignment: Selects the logo print position.

Bottom Logo Sets the logo that is printed at the bottom of the paper.

❏ Key-code: Selects the Key-code of the logo to be printed.

❏ Alignment: Selects the logo print position.

Condition Sets the condition for top logo printing.

❏ When paper is cut by command: The checkmark cannot be removed from this

checkbox.

❏ When cover is closed: Sets whether the top logo is printed when the cover is

closed.

❏ When printer is powered on: When you select this, the printer is reset every

time the printer setting is changed, paper is automatically cut and [Top Logo]

is printed.

Extra Upper Space

Reduction*

Selects whether to reduce the top margin when printing the logo

configured at [Top Logo]. Selecting this may cause a white line

appear on the top logo (13 mm away from the top of the logo).

Run the Test Printing to see if the logo is printed properly.

Selecting this may cause a white line appear on the logo (13 mm

away from the top of the logo). Make sure to conduct a test print

to see if the print result is acceptable for you.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 125 126

No comments

Epson TM-T82 User Manual Page 109