Epson BrightLink 480i User's Guide download pdf (Page 200)

• Press one of the Source buttons on the remote control to select the source for the image you want to

annotate. To use a blank screen, select Computer2 or another unused source

Note: You cannot use the built-in toolbar if you select the same source that is selected for Easy

Interactive Tools in the Extended menu.

• Make sure you have calibrated the system. Try recalibrating.

Parent topic: Solving Interactive Pen Problems

Related references

Projector Setup Settings - Extended Menu

Solutions When the Interactive Pen Position Is Not Accurate

If the pen position is not the same as the cursor, try the following solutions:

• Make sure you have calibrated the system. Try manual calibration.

• Make sure the cable cover is in place to keep cables from blocking the signal.

• Try adjusting the pen operation area.

• If you use the E-Zoom + button on the remote control to enlarge the image, the pen position is not

accurate. When you return to the original size, the position should be correct.

Parent topic: Solving Interactive Pen Problems

Related tasks

Adjusting the Pen Operation Area

Calibrating Automatically

Calibrating Manually

Solutions When the Interactive Pens Are Slow or Difficult to Use

If the pens are difficult to use or respond too slowly, try the following solutions:

• For easier operation, hold the pen perpendicular to the projection surface.

• For the best performance, connect your computer to the projector using a VGA computer cable for

display and the USB cable for interactivity.

• If you are using USB display in Windows, you may need to disable Windows Aero in the EPSON USB

Display Settings program on your computer.

Parent topic: Solving Interactive Pen Problems

200

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 258 259

No comments

Epson BrightLink 480i User's Guide Page 200