Epson ELPMBPRG User Manual download pdf (Page 6)

6 of 11

Visit the Peerless Web Site at www.peerless-av.com For Technical Support Contact Peerless Mounts at 1-800-865-2112

ISSUED: 04-01-08 SHEET #: 055-9254-19 02-28-14

Place projector mount assembly (A) on ceiling as a

template and mark the center of the two mounting

holes.Drilltwo5/16"(8mm)dia.holestoaminimum

depthof2.5"(64mm).Attachprojectormount

assembly (A) using two

concrete anchors (H), two

atwashers(K),andtwo#14x2.5"woodscrews(L)

as shown in Illustration A and 1, 2 and 3).

NOTE: Mounting slots on projector mount assembly

allow for 30° (±15°) of swivel adjustment before fully

securing wood screws.

Tighten wood screws (L)using3/8"(10mm)socket

or open end wrench or phillips screwdriver until

projector mount assembly (A)isrmlyattached.

Installation to Concrete Ceilings

Illustration A

CONCRETE CEILING

CUTAWAY VIEW

CORRECT

plaster/

dry wall

concrete

INCORRECT

plaster/

dry wall

concrete

• Always attach concrete anchors directly to load-

bearing concrete.

• Never attach concrete anchors to concrete covered

withplaster,drywall,orothernishingmaterial.

WARNING

• Tightenwoodscrewsrmly,butdonotovertighten.

Overtightening can damage the screws, greatly

reducing their holding power.

• Never tighten in excess of 80 in • lb (9 N.M.).

WARNING

Drill holes and insert anchors (H).

Place plate (A) over anchors (H) and secure with screws (L).

Tighten all fasteners.

concrete

surface

• Neverattachconcreteexpansionanchorstoconcretecoveredwithplaster,drywall,orothernishingmaterial.

WARNING

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Epson ELPMBPRG User Manual Page 6

Comments to this Manuals

Related products and manuals for Projectors Epson ELPMBPRG