Epson FX-100 User Manual download pdf (Page 64)

of line

is the number 4, and the symbol for the

of line 30 is the

number 5, so enter the following:

10 LPRINT CHR$(27)“4”

LPRINT CHR$(27)"5";

Now use RUN to make sure that both ESCape sequences work as

before.

You can also shorten your programs by storing the ESCape code in

a character string. If you enter A$=CHR$(27) in an early line of a

program, you can simply enter A$ each time you want the ESCape

code. For example, the following lines produce the same results as the

previous ones:

5 A$=CHR$(27)

1Ø LPRINT A$"4"

3Ø LPRINT

A$"5";

This technique can help if you use the ESCape code frequently.

If you use a certain ESCape sequence often in a program, you can

store it in a character string as shown in this example:

5 B$=CHR$(27)+"4"

1Ø LPRINT B$

Note that in this case you must use a plus sign between the elements of

the ESCape sequence.

Summary

You use CHR$ to send numeric codes from BASIC, and you use

CHR$(27), the ESCape code, to earmark the printing or action to

occur on the FX printer. You turn on an FX mode by using the ESCape

code and adding to it either the character-string command and an

appropriate FX control code or else the ASCII equivalent of the con-

trol code enclosed by quotation marks.

Nearly all printer modes stay active until they are turned off (we

cover the exceptions later). You can turn off one printer mode or set of

modes by shutting the printer off or by sending the Reset Code, either

of which resets the FX to its default modes. In addition, each mode has

its own cancelling code that turns off only that particular mode.

You can delete all the text characters in the FX’s buffer by using the

CANcel code or the latest text character by using the DELete code.

Neither affects the control codes.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 267 268

No comments

Epson FX-100 User Manual Page 64