Epson PowerLite 450W Installation Guide download pdf (Page 20)

Align the slider with the mark on the slider measure that is a distance (a+x) equivalent to the

distance (a) plus the thickness of the board (x). See the tables on pages 12 to 16. The

recommended range for projection distance (a) is 2.76 to 14.57 in. (7 to 37 cm).

C Attach the setting plate to the wall plate

(1) Position the cables between the two screws and pass the cables through the setting plate

(

A).

(2) Hang the setting plate hook onto the wall plate bar (

B).

(3) Tighten the two M8 x 15 mm hexagon socket head cap bolts and two M8 x 45 mm hexagon

socket head cap bolts supplied with the setting plate so that the setting plate becomes

vertical against the wall (

C).

Use the two M8 x 45 mm hexagon socket head cap bolts to adjust the vertical position.

s 26

Screws (4 )

Slider measure

Take care not to trap the cables between the setting plate and wall plate.

Caution

Setting plate

Cables

Wall plate

M8 x 15 mm hexagon socket

head cap bolts (one on left

and one on right)

Wall plate bar

M8 x 45 mm hexagon

socket head cap bolts (2)

Setting plate hook

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

No comments

Epson PowerLite 450W Installation Guide Page 20