Epson M119D User Manual download pdf (Page 9)

TM-U200 Series User’s Manual 7

English

6. Type A only: When using 2-ply roll paper, insert the end of the

paper into the paper take-up spool as shown below. Be sure

that length of dimension A is between 40 and 60 mm (1.58 and

2.36 inches) and the left side of the paper is aligned with the

spool’s flange, which is indicated by the arrow in illustration

below.

7. Insert the journal take-up spool in the printer, as shown in

illustration

10, and cut the receipt paper.

8. Close the autocutter by using the tab. Be sure to check again

that the left side of the paper is aligned with the spool’s flange;

then close the printer cover.

Troubleshooting

No lights on the control panel

Check the power supply cable connections and the power outlet.

ERROR light flashing with no printing (and no paper jam)

Printing stops if the head overheats and resumes when it cools.

Turn the printer off, and after 10 seconds, turn it back on.

Removing jammed paper

Follow these steps to clear a paper jam:

CAUTION:

The print head becomes very hot during printing. Allow it to

cool before you reach into the printer.

1. Open the printer cover.

910

✒✐✐◆✗✎❂❏❏❋ ✰❁❇❅ ✗ ✴❈◆❒▲❄❁❙✌ ✡◆❇◆▲▼ ✒✙✌ ✒✐✐✒ ✑✑✚✓✐ ✡✭

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 71 72

No comments

Epson M119D User Manual Page 9