Epson 536Wi Installation Guide download pdf (Page 11)

• Video (composite video)

Connecting Audio

A variety of audio connections are available:

• You can connect a dynamic microphone to the Mic port and output the sound through the projector.

• You can also output computer audio. If you connected the computer using a VGA cable, you need to

connect an optional 3.5 mm stereo mini-jack audio cable for sound. If you are using more than one audio

connection, label the cables Audio1 or Audio2.

• If you connected the computer using an HDMI, USB Display, or Ethernet cable, you can output both video

and audio through the cable.

• To enhance the sound from your presentation, you can connect the projector to amplified or self-powered

external speakers. The volume can be controlled using the projector’s remote control.

If you want to output audio from the external speakers (or use the microphone) when the projector is turned

off, you need to adjust the Standby Setup settings in the projector’s Extended menu. In Standby mode, you

can output only Computer1 or Computer2 audio or composite audio (red and white RCA connectors).

Component to VGA

connections

HDMI connection

Composite video

connection

S-video connection

RCA audio

connections

LAN connection (video and audio)

HDMI connection

(video & audio)

External speaker connection

Computer1 audio

connection

Computer2 audio

connection

Microphone connection

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

No comments

Epson 536Wi Installation Guide Page 11