Epson 536Wi Installation Guide download pdf (Page 25)

3. Route the cables through the arm unit

Route the projector’s power cord and any additional cables connecting to the projector through the arm unit.

4. Attach the wall mount to the wall plate

1. Attach the hook on the arm plate to the bar on the wall plate.

2. Partially tighten two M8 × 16 mm hexagon socket head cap bolts to secure the arm plate .

Be sure to also route the cables for any optional equipment (for example document

camera, speakers, etc.) that may be used in the future. Otherwise, each time you need

to connect another device, you will need to remove the projector from the mount to

connect additional cables.

Route the USB cable so that the type B connector emerges on the projector side. Epson

recommends labeling any duplicate cables so that additional connections can be more

easily identified.

Arm unit

Vertical adjustment

screw

Problems may occur if you use this product without routing the cables through the arm unit.

Caution

Arm unit

Arm plate

Bar on wall plate

Wall plate

M8 × 16 mm

hexagon socket

head cap bolt (×2)

Take care not to trap the cables between the mount arm and wall plate.

Caution

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 63 64

No comments

Epson 536Wi Installation Guide Page 25