Epson EH-TW5900 User's Guide download pdf (Page 39)

Adjusting the Image

Viewing the Image at the Saved Image Quality

(Memory Function)

Saving Function

You can save the adjustment values for some images and image quality settings in the configuration menu

for later use (Save Memory).

Because these saved adjustment values can be loaded from the remote control, you can easily switch to your

preferred image quality (Load Memory).

The following configuration menu functions can be saved.

Image

p.57

Color Mode, Power Consumption, Brightness, Contrast, Color Saturation, Tint, Sharpness,

Abs. Color Temp., Skin Tone, Advanced-Sharpness, Offset, Gain, Gamma, Hue, Saturation,

Brightness, Auto Iris

Signal

p.58

Progressive, 2-2 Pull-down, Motion Detection

Advanced Noise Reduction, Setup Level, EPSON Super White, Overscan, HDMI Video

Range

Saving a Memory

You can register a memory when Color Mode is set to anything except Auto.

Make settings that you want to save to

the configuration menu.

Press the button.

Use the buttons to

select Save Memory, and then press

the

button to confirm the

selection.

The Save Memory screen is displayed.

Use the buttons to

select the memory name to be saved,

and then press the

button to

confirm the selection.

The current projector settings are saved to

the memory.

When the mark to the left of the memory

name turns green, saving is complete. If you

select a memory name that has already

been used, a message is displayed asking if

you want to overwrite the data. If you select

Yes, the previous content is erased and the

current settings are saved.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 94 95

Comments to this Manuals

No comments

Epson EH-TW5900 User's Guide Page 39

Comments to this Manuals

Related products and manuals for Data projectors Epson EH-TW5900