Epson EH-TW5900 User's Guide Page 77

  • Download
  • Add to my manuals
  • Print
  • Page
    / 95
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 76
Troubleshooting
76
Check Remedy
Is WirelessHD set to Off? When WirelessHD is set to Off from the configuration menu,
projection is not possible for WirelessHD input signals. Set Wire-
lessHD to On, and then press the
button. s Settings -
WirelessHD p.61
Are signals being received within the Wire-
lessHD transmission range?
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
s p.55
Is the supplied WirelessHD Transmitter
turned on?
Check the power lamp on the WirelessHD Transmitter. If there is
no power being supplied, make sure the connector for the AC
adapter is securely connected, and then turn on the power
switch.
Is the Link indicator for the supplied Wire-
lessHD Transmitter off?
No AV device is connected. Check that the HDMI cable is securely
connected.
Are the indicators of the supplied WirelessHD
Transmitter flashing alternately?
A temperature warning has occurred. Operations are stopped if
there is not enough ventilation, such as when the device is placed
on an audio rack, or if it is being used in a room with a high
ambient temperature. Wait until it has cooled down, and then
try again.
Interference or distortion appear in WirelessHD images
Check Remedy
Are signals being received within the Wire-
lessHD transmission range?
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
s p.55
Are there any obstructions between the Wire-
lessHD Transmitter and the projector?
Because WirelessHD communicates using a tight beamed elec-
tromagnetic wave, if there are any people or objects and so on
obstructing the communication path, this could have an adverse
affect on the image. Make sure that there are no obstacles be-
tween the WirelessHD Transmitter and the projector within the
WirelessHD transmission range.
s p.55
Is the reception too low? If the transmissions are not strong enough, communication may
be unstable.
Check Reception as you set up the transmitter as it is sometimes
possible to improve the strength of the transmission by moving
the WirelessHD Transmitter or changing its direction.
s Set-
tings - WirelessHD - Reception p.61
Transmission strength may differ depending on the surround-
ings, or they may be unstable. While checking Reception, setup
the transmitter in a location where the number displayed re-
mains steady.
s Settings - WirelessHD - Reception p.61
Problems with USB storage devices
Slideshow does not start
Check Remedy
Is the USB storage device using a security
function?
You may not be able to use USB storage devices that incorporate
security functions.
Page view 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 94 95

Comments to this Manuals

No comments