Epson EH-TW5900 User's Guide Page 74

  • Download
  • Add to my manuals
  • Print
  • Page
    / 95
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 73
Troubleshooting
73
Image colors are not right
Check Remedy
Is the image signal format setting correct? When Video is input
If nothing is projected even when Video Signal is set to Auto
from the configuration menu, set the signal that matches the
connected device.
s Extended - Input Signal - Video Sig-
nal p.63
When Component is input
If nothing is projected even when Component is set to Auto
from the configuration menu, set the signal that matches the
connected device.
s Extended - Input Signal - Compo-
nent p.63
Are the cables connected correctly?Check that all the cables required for projection are securely
connected.
s p.18
For the Video and Component ports, make sure the connector is
the same color as the cable port.
s p.18
Is the contrast adjusted correctly?
Adjust the Contrast setting from the configuration menu.
s Image - Contrast p.57
Is the color adjusted correctly?
Adjust the Advanced setting from the configuration menu.
s Image - Advanced p.57
(Only when projecting images from a video
device)
Are the color saturation and tint adjusted cor-
rectly?
Adjust the Color Saturation and Tint settings from the config-
uration menu.
s p.57
Images appear dark
Check Remedy
Is the image brightness set correctly?
Adjust the Brightness setting from the configuration menu.
s Image - Brightness p.57
Is the contrast adjusted correctly?
Adjust the Contrast setting from the configuration menu.
s Image - Contrast p.57
Is it time to replace the lamp? When the lamp is nearly ready for replacement, the images be-
come darker and the color quality becomes poorer. When this
happens, replace the lamp with a new lamp.
s p.81
Projection stops automatically
Check Remedy
Is Sleep Mode enabled?
If no image signal is being input and no operations are made for
approximately 30 minutes, the lamp turns off automatically, and
the projector enters standby status. The projector returns from
standby status when you press the
button on the remote
control or the
button on the control panel. If you do not want
to use Sleep Mode, change the setting to Off.
s Extended -
Operation - Sleep Mode p.63
Page view 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 94 95

Comments to this Manuals

No comments