Epson EMP EMP-81 User's Guide download pdf (Page 99)

List of ESC/VP21 Commands

USB Connection Setup

In order to control the projector using ESC/VP21 commands via a USB

connection, the following preparations must be carried out.

PROCEDURE

Download the USB driver (USB-COM Driver) from the

EPSON website to your computer.

The URL is as follows.

http://www.epson.co.uk/support/download/index.htm

Install the downloaded USB driver on your computer.

Read the instructions displayed on the download screen.

Change the "COM Port" setting in the "Extended"

menu to "USB".

Turn the projector's power off.

Wait until the cool-down

period has ended and a

"pip-pip" confirmation buzzer sounds, and then turn

on the power.

Once the projector's power has turned back on, communication

via a USB Connection will then be possible.

CAUTION

If you disconnect the power cable before the cool-down period has

ended and a "pip-pip" confirmation buzzer sounds, the

communication port will not change.

Downloaded From projector-manual.com Epson Manuals

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 108 109

No comments

Epson EMP EMP-81 User's Guide Page 99