Epson GT-10000 User Manual download pdf (Page 22)

1-14

Setting Up the Scanner

R4C345

Rev. C

A5 size CHAP1.FM

10/7/99 Pass 0

Proof Sign-off:

<tantoname> SEI K.Ito M.Fujimori

<leadername> M.Fujimori

<editorname> SEI G.Hildebrand

SCSI ID and terminator

Each device has a SCSI ID number: the computer (SCSI interface

board) is usually set to number 7, and each of the other devices

must have a unique number between 0 and 6. Both ends of daisy

chain should be terminated. This can be done by connecting an

external terminator to the SCSI device at the end of the chain, or

enabling on internal termination of the SCSI device at the end of

the chain. If the PC is at the end of the daisy chain, its internal

terminator should be switched on. Otherwise, its terminator

should be off. An external terminator on a SCSI device in the

middle of the chain should be removed, or its internal terminator

should be switched off.

Setting the SCSI ID number

The scanner's default SCSI ID number is 2.

The SCSI ID rotary switch

is located on the back of

the scanner.

2-04.eps

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 103 104

No comments

Epson GT-10000 User Manual Page 22