Epson H6000IIP - TM Two-color Thermal Line User Manual download pdf (Page 11)

TM-H6000II User’s Manual 9

English

2. Press the RELEASE button 7 times; then close the paper roll

cover. The printer prints the following message on receipt

paper and the SLIP light flashes.

3. Insert the cleaning sheet like a standard check.

CAUTION:

Be sure that the sheet is inserted with the correct side up and that it is

inserted in the correct direction.

Use a cleaning sheet only one time; then discard it.

4. When the sheet is ejected, press the RELEASE button, and

remove the sheet from the printer.

Notes on using the MICR reader

Do not install the printer near any magnetic fields. Be especially

careful where you install your display device and be sure to check

the recognition rate of the MICR reader with the display device in

place.

Make sure that the printer is not subjected to any impact or

vibration when it is performing a MICR reading.

Endorsement Printing

If your printer has the optional endorsement printing mechanism,

install the endorsement ribbon following the steps below:

Note:

Be sure to turn on the power before installing a ribbon cassette.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 67 68

No comments

Epson H6000IIP - TM Two-color Thermal Line User Manual Page 11