Epson Perfection 610 Scanner Basic Guide download pdf (Page 27)

Step-by-Step Scanning Instructions

This section contains step-by-step instructions for using the scanner drivers and

creative software in Windows 98 and Macintosh. For more details on using the

scanner software, see the EPSON TWAIN User’s Guide on your CD-ROM. For

instructions on using the creative software, see your application’s online help or

electronic manual (see “Viewing Your Electronic Manuals” on page 19).

If your computer fails to recognize the scanner, you won’t see

the EPSON TWAIN driver when you try to select a scanner

source from your host application. In addition, an error

message may appear. If this happens, unplug your scanner

and then plug it back in. Then restart the computer.

Do not connect or disconnect the USB cable while you are

using EPSON TWAIN.

Place Your Original Document

1. Raise the scanner cover and place your

document face down on the document

table glass.

2. Position the document so the horizontal

and vertical edges are carefully aligned with

the scales on the top and right side of the

document table.

3. Close the document cover slowly. Be

careful not to move the document.

An area of 0.12 inches (3 mm) in from the horizontal and

vertical guides is not scanned.

The self-adjusting scanner cover allows you to place thick

documents on the document table glass without removing it.

If your document is too thick to fit under the cover, you can

remove the cover as described on page 29.

corner of the

document

basics.book Page 22 Wednesday, August 11, 1999 2:26 PM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 79 80

No comments

Epson Perfection 610 Scanner Basic Guide Page 27