Epson Perfection 610 Scanner Basic Guide download pdf (Page 57)

Cleaning the Scanner

To keep your scanner operating at its best, you should clean it periodically. Before

cleaning, unplug the power cord.

Use a soft cloth to clean the outer case with mild detergent dissolved in water.

If the document table glass gets dirty, clean it with a soft, dry cloth. If the glass is

stained with grease or other hard-to-remove material, use a small amount of glass

cleaner on a soft cloth to remove it. Wipe off any remaining liquid with a dry cloth.

Be sure there’s no dust on your document table. Dust can cause white spots to appear

in your scanned image.

Never use a harsh or abrasive brush or cleaning product to

clean the document table. A damaged glass surface can

decrease the scanning quality.

Never use alcohol, thinner, or corrosive solvent to clean the

scanner. These chemicals can damage the scanner

components as well as the case.

Be careful not to spill liquid into the scanner mechanism or

electronic components. This could permanently damage

them.

Don’t spray lubricants inside the scanner.

Never open the scanner case. If you think repairs or

adjustments are necessary, consult your dealer or contact

EPSON.

basics.book Page 52 Wednesday, August 11, 1999 2:26 PM

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 79 80

No comments

Epson Perfection 610 Scanner Basic Guide Page 57