25
Chapter 2 Install
2
Checks after starting TD Bridge
TD Bridge executes the following checks soon after it starts. If some problem is detected, an error message is
displayed.
• Version check for EPSON Total Disc Maker
Checks the version of EPSON Total Disc Maker, and if it is not supported, the message is displayed
accordingly.
In such a case, install EPSON Total Disc Maker Ver 1.5X or later again.
• Check for the default output equipment
Checks if the default output equipment on the environment settings is [enabled] or not. If it is set to
[disabled], the message is displayed accordingly.
Configure the default output equipment on the environment settings. (See "TD Bridge Settings" on page
3-27 for the environment settings.)
• Check the monitorning folder
Check if the monitoring folder is accessible or not. If not, the message is displayed accodingly.
If the system folder should be set as a monitoring folder, make sure to select a folder other than the
system folder.
If the monitoring folder can not be found, set a monitoring folder on the environment settings again. (See
"TD Bridge Settings" on page 3-27 for environmental settings.)
Comments to this Manuals