Epson F2000 User Manual download pdf (Page 12)

How To 12

How To

Overview

This section describes the general procedure on how to set up the network interface for

use on a network.

1. Check the network interface operation.

Check the functions and operations of the network interface, such as status lights and

RJ-45 connector. See “Network Interface Operation” on page 10 for details.

2. Select a printing method.

Select a printing method appropriate for your network environment and operating

system. If you are not sure, see “Printing from Windows” on page 13 or “Printing from

OS X” on page 13 for details.

3. Install the necessary components on your computer.

Make sure the necessary components (such as TCP/IP) are installed on the computer,

and network settings (such as IP address, subnet mask, etc.) of the computer is set.

See “About Installing Components on Your Computer” on page 14 for details.

4. Connect the network interface to the network.

Connect the network interface to the network. See “Connecting the Network Interface

to the Network” on page 18 for details.

5. Configure the network interface and install the printer driver.

See “Configuring the Network Interface (Windows)” on page 19 or “Installing the Printer

Driver” on page 21 for details.

6. If necessary, configure the network settings of the network interface using EpsonNet

Config.

Configure the network interface using EpsonNet Config. For Windows users, see

“EpsonNet Config for Windows” on page 31. For OS X users, see “EpsonNet Config for

Mac OS” on page 32.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 55 56

No comments

Epson F2000 User Manual Page 12