Epson R800 Troubleshooting Guide download pdf (Page 6)

Epson Stylus Photo R800

6 - Epson Stylus Photo R800 1/04

Installing the First Ink Cartridges

1. Open the output tray, pull out its extensions, and open the

printer cover.

2. Release and open the cartridge cover, then remove the

protective sheet inside.

3. Shake the ink cartridge packages 4 or 5 times before

opening them. (Don’t shake them after they’re unpacked.)

4. Remove the ink cartridges from their packages.

5. Slide each cartridge individually into its slot with the green

part facing the front.

Make sure the colors on the cartridges match the labels

inside the cartridge cover.

Then push each one down until it clicks into place.

6. Close the cartridge cover and press it down until it clicks

into place.

7. Close the printer cover, then press the H ink button.

8. The green P power and red H ink lights flash as your

printer charges ink for about 2 1/2 minutes.

Caution: Don’t turn off the printer or interrupt charging, or you’ll

waste ink. If the

P power and H ink lights don’t turn off after 5

minutes, and the printer isn’t making any noise, you can turn it off.

Don’t touch

the green part

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Epson R800 Troubleshooting Guide Page 6