Epson 2180 - LQ B/W Dot-matrix Printer User's Guide Page 154

  • Download
  • Add to my manuals
  • Print
  • Page
    / 229
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 153
7-12 Troubleshooting
The printer makes noise, but nothing prints or printing stops
abruptly
Cause What to do
The paper thickness lever is
set incorrectly.
Set the paper thickness lever to match
the thickness of your paper. See
“Setting the Paper Thickness Lever”
in Chapter 2.
The ribbon has too much
slack, the ribbon has come
loose, or the ribbon cartridge
is not installed properly.
Remove any slack in the ribbon by
turning the ribbon-tightening knob, or
reinstall the ribbon cartridge as
described in Chapter 1.
The printout is faint.
Cause What to do
The paper thickness lever is
set incorrectly for your
paper.
Move the paper thickness lever to a
lower setting.
The ribbon is worn out. Replace the ribbon cartridge as
described in Chapter 1.
The printout has gaps.
Cause What to do
The paper thickness lever is
not set correctly.
Set the paper thickness lever to match
the thickness of your paper. See page
2-4 for continuous paper, or page 3-3
for single sheets.
Page view 153
1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 228 229

Comments to this Manuals

No comments