Epson 2180 - LQ B/W Dot-matrix Printer User's Guide download pdf (Page 53)

2-8 Printing on Continuous Paper

Using the Front Push Tractor

To use the front push tractor, load continuous paper in the front

slot. For more information on when to use the front push tractor,

see “Available Paper Paths” on page 3.

Note:

The tractors are installed in the front push and rear push positions when

the printer is shipped. The rear push tractor cannot be removed.

Installing the tractor in the front push position

If a tractor is installed in the front push position, skip to “Loading

paper onto the front push tractor“ on the next page.

If a tractor is installed in the pull position, you need to remove it,

and replace the paper tension unit as described on page 2-33

before using the front push tractor.

To install the tractor in the front push position, follow these steps:

1. Make sure the printer is turned off.

2. Open the front paper guide by pulling the tab at the center

of the guide. Then remove the guide by grasping both sides

and pulling it straight out of the printer.

tab

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 228 229

No comments

Epson 2180 - LQ B/W Dot-matrix Printer User's Guide Page 53