Epson 2180 - LQ B/W Dot-matrix Printer User's Guide Page 92

  • Download
  • Add to my manuals
  • Print
  • Page
    / 229
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 91
3-6 Printing on Single Sheets
Loading envelopes
You can load envelopes only in the top paper slot as described in
“Loading Single Sheets in the Top Paper Slot” on page 3-8. Also,
follow these guidelines:
Load envelopes one at a time in the top slot, with the flap edge
first and the flap side up.
Set the paper thickness lever (located under the printer cover)
to position 2 to 6 to match the thickness of the envelope.
Before printing, turn on the card mode by pressing the Tear
Off/Bin
button until both Tear Off/Bin lights are on.
After you finish printing on envelopes, press the
Tear Off/Bin
button once to exit the card mode. (Bin 1 is selected.)
Do not use envelopes that are curled or folded. Also avoid
using envelopes that are too thin; they may curl during
printing and become jammed.
If you use No. 6 envelopes, align the left edge of the envelope
with the arrow mark on the printer.
Use envelopes only under normal temperature and humidity
conditions, as follows:
Temperature 15 to 25°C (59 to 77°F)
Humidity 30 to 60% RH
f
ap s
id
e up, pr
i
n
t
a
b
e
side down
Page view 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 228 229

Comments to this Manuals

No comments