Epson ActionPrinter 3260 s User's Guide download pdf (Page 69)

14. Slide the left edge guide of the paper guide to the center

until it stops at the diamond-shaped guide mark. Then

slide the right edge guide to the opposite guide mark.

You can easily switch between continuous paper and cut-sheet

feeder operation. See “ Switching back to single sheets” on page

2-12 for details.

Note:

❏

When you print several pages of continuous paper, fold the first

printed page forward at the perforation after it emerges from

below the printer cover. This helps the printer feed the printed

pages properly and prevents paper jams.

❏

To remove the paper guide from the cut-sheet feeder, press both

release tabs and pull out the paper guide.

Pull Tractor Unit

An additional pull tractor (C80030

✽

) is available as an option.

You can improve the performance of continuous paper

handling by using two tractors at the same time. This is

especially useful with continuous pre-printed forms, multi-part

forms, and labels.

1. Make sure the paper-release lever is pulled forward to the

continuous paper position. Install the built-in tractor in the

push tractor position. Install the optional tractor in the pull

tractor position. See page 2-13.

2. Load continuous paper on the sprocket units of the push

tractor. (See “ Printing on Continuous Paper” on page 2-7.)

3. Turn on the printer. Hold down the

LF/FF

button to feed

paper forward one page.

Blackberry REV.D

A5 size Chapter 2

96/04/08 pass 1

Using the Printer

2-33

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 119 120

No comments

Epson ActionPrinter 3260 s User's Guide Page 69