Epson Photo R3000 Series User's Guide download pdf (Page 60)

Tip:

Choosing Mid or Min decreases the image

enlargement ratio. Therefore, some margins may

appear at the edges of the paper depending on the

paper and printing environment.

D

Check other settings and start printing.

Making Settings for Mac OS X

A

Open the Print screen and select the paper size

from the Paper Size option, and then select a

borderless printing method.

U “Basic Printing Methods (Mac OS X)” on

page 31

The selections for borderless printing methods

are displayed as shown below.

XXXX (Sheet Feeder - Borderless (Auto

Expand))

XXXX (Sheet Feeder - Borderless (Retain Size))

XXXX (Fr.-FineArt(Borderless, Auto Expand))

XXXX (Fr.-FineArt(Borderless, Retain Size))

A3+ (Roll Paper - Borderless)

A3+ (Roll Paper - Borderless Banner)

Where XXXX is the actual paper size, such as A4.

When using Mac OS X 10.4, or if items on the

Page Setup screen are not displayed on the Print

screen due to the application being used in Mac

OS X 10.6 or 10.5, display the Page Setup screen

and make settings.

B

If Auto Expand is selected for Paper Size, set how

much of the image goes beyond the edge of the

paper in the Expansion screen.

Select Page Layout Settings from the list. The

following shows how much the image will be

larger than the paper edges.

Max Sizes larger than A4:

Approximately 3 mm past the top,

4.5 mm past the bottom, and 3.5 mm

past the left and right edges

A4 or smaller (excluding 100 × 148

mm, 9 × 13 cm/3.5 × 5 in., 10 × 15

cm/4 × 6 in.):

Approximately 3 mm past the top, 4

mm past the bottom, and 2.5 mm

past the left and right edges

100 × 148 mm, 9 × 13 cm/3.5 × 5 in.,

10 × 15 cm/4 × 6 in.:

Approximately 1.3 mm past the top,

2.5 mm past the bottom, and 2.5 mm

past the left and right edges

Mid ½ of Max

Min ¼ of Max

Epson Stylus Photo R3000 User's Guide

Printing Varieties

60

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 118 119

Comments to this Manuals

No comments