Epson PLQ-20M User's Guide download pdf (Page 53)

42 Changing your Printer’s Settings

Auto I/F wait time (Seconds)

When the printer is in the auto interface mode and it receives no

data from the currently selected interface for the amount of time

specified with this setting, it determines which interface is

receiving data and switches to that interface. You can specify

either 10 or 30 for the auto interface wait time. When the printer

turns on in the PR2 mode, this mode is not activated.

Parallel I/F bidirectional mode

The Parallel Interface bidirectional transfer mode is used when

this feature is set to On. If bidirectional transfer mode is

unnecessary, select Off.

Packet mode

Make sure to select Auto when you print from Windows

applications using the printer driver included on the User

CD-ROM. Set this feature to Off if you have connection troubles

while printing from applications based on other operating

systems such as DOS. When the printer turns on in the PR2 mode,

this mode is set to Off.

Baud rate (bps)

Use this option to set the data transfer rate (baud) for the serial

interface. The baud rate is measured in bits per second (bps).

Data length (bit)

Set the data length of the serial interface to 7 or 8.

Parity

When this option is set to None, parity checking is disabled. The

parity bit, if used, provides a basic form of error detection.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 115 116

No comments

Epson PLQ-20M User's Guide Page 53