Epson PLQ-20M User's Guide download pdf (Page 59)

48 Changing your Printer’s Settings

Auto CR

When auto carriage return is set to On, each line feed (LF) code

is accompanied by a carriage return (CR) code so the printer

moves the next printing start position to the left margin. When

this setting is set to Off, you must send a CR code after the line

feed code to move the printing start position to the left margin.

Columns

You can select the number of columns in one line.

TOF position for PR40+

When you select On in this option and PR40+ in Emulation, the

top-of-form position is set to 6.5 mm which is unique to the PR40+

mode. When you select Off and PR40+, the top-of-form position

is set to the same position as in the PR2 and PR54+ modes (the

factory set default is 4.2 mm).

Magnetic standard

You can select the magnetic standard in this setting.

This feature is available only for PLQ-20M.

End sentinel

You can select C or F as the letter which will be attached to the

end of the data recorded on magnetic stripes.

This setting is effective only when the format for IBM3604 or

IBM4746 is selected in the Magnetic standard setting.

This feature is available only for PLQ-20M.

Displacement

This option allows you to select the displacement value of the

magnetic stripe.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 115 116

No comments

Epson PLQ-20M User's Guide Page 59