Epson Stylus Color 800N Setup Guide download pdf (Page 9)

Setup Guide

6. Push down the clamp until it locks in place.

7. Press the X color cleaning button. The print heads move to

the left again so you can install the color ink cartidge.

8. Follow steps 3 through 6 to install the color ink cartridge.

9. Press the E load eject button.

The printer moves the print heads and begins charging the ink

delivery system. The P power light flashes, and the printer

makes various sounds. Charging takes up to 7 minutes. Don’t

turn off the printer or interrupt this important process or

you’ll use up more ink than necessary. When it’s finished, you

can close the printer cover.

load/eject

button

black

cleaning

button

color

cleaning

button

Caution:

Never turn off the printer

when the

power light

is flashing. However if

the

power light is still

flashing after 10

minutes and the printer

is not moving or making

noise, you may turn off

the printer.

QuikSet2.fm Page 6 Wednesday, October 15, 1997 3:49 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

No comments

Epson Stylus Color 800N Setup Guide Page 9