Epson Stylus Pro 7880C User's Guide download pdf (Page 178)

100

101

The Control Panel 178

Aligning the print head

To prevent deterioration of print quality caused by misalignment

of the print head, align the print head before you start printing

your data. You can align the print head either manually or

automatically. Try the automatic print head alignment first. If the

print head is still misaligned, try to perform the print head

alignment manually.

Aligning the print head automatically

1. Make sure that paper is loaded in the printer.

Note:

For best results in printing the head alignment pattern, use the same

media that you normally use to print your data.

2. Press the Menu r button to enter Menu mode.

3. Press the Paper Feed d button or Paper Feed u button to

display HEAD ALIGNMENT, and then press the Menu r button.

4. When PAPER THICKNESS appears, press the Menu r button.

5. Press the Paper Feed d button or Paper Feed u button to

select STANDARD or a paper thickness value between 0.1 mm

and 1.5 mm. When the paper thickness value is 0.2 mm or

1.2 mm, select STANDARD; otherwise, select the actual paper

thickness value.

6. Press the Enter

button to register your value.

7. Press the Paper Source l button, and then press the Paper

Feed d button.

8. When ALIGNMENT appears on the lower row on the LCD panel,

press the Menu r

button.

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 372 373

Comments to this Manuals

No comments

Epson Stylus Pro 7880C User's Guide Page 178

Comments to this Manuals

Related products and manuals for Print & Scan Epson Stylus Pro 7880C