Epson Stylus Pro 7880C User's Guide Page 197

  • Download
  • Add to my manuals
  • Print
  • Page
    / 373
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 196
The Control Panel 197
The print data in the print buffer is printed with 16-byte hex.
data in the left column and corresponding ASCII characters
in the right column.
Note:
If the last data is less than 16 bytes, it is not printed until you press the
Pause
button.
LANGUAGE
You can select the language to be displayed on the LCD panel.
To select a suitable language, follow the steps below.
1. While in Maintenance mode, press the Paper Feed d button
or Paper Feed u button to display LANGUAGE, and then press
the Menu r
button.
2. Press the Paper Feed d button or Paper Feed u button to
select a suitable language.
3. Press the Enter
button to set the language. Make sure that
READY (or similar word in the language selected) appears on
the LCD panel.
Note:
It takes a while until READY (or similar word in the language selected)
appears.
REMAINING PPR SETUP
You can select a paper remaining counter function. When this
function is on, ROLL PAPER COUNTER appears on the PRINTER
SETUP menu.
1. While in Maintenance mode, press the Paper Feed d button
or Paper Feed u button to display REMAINING PPR SETUP,
and then press the Menu r
button.
Page view 196
1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 372 373

Comments to this Manuals

No comments