Epson Stylus Pro Original User Manual download pdf (Page 3)

To remove the chip from an original cartridge, use a sharp

knife to cut off the top of the plastic stud just in front of the

gold chip contacts as in this picture. Try to avoid touching the

gold contacts with the knife when doing this.

Once you have trimmed off the top of the plastic stud, use the

knife to lift up the edge of the chip. The chip can now be pulled

off the original cartridge. Try to avoid touching the gold

contacts on the chip when handling it.

Take the refillable cartridge that corresponds to the color of

the original chip you have just removed, and remove the

bridge chip from the cartridge. Removing the bridge chip is

very simple – simply use a small screw driver to lever up the

plastic at the end of the bridge chip as in this picture. Once you

have levered up the end of the plastic, the bridge chip can be

completely removed from the cartridge.

Take the original chip and place it into the recess in the top

surface of the refillable cartridges as in this picture. The

bottom surface of the recess has two lugs molded in that line

up with the two holes in the original chip, so that it can be

located correctly.

1 2 3 4 5 6 7 8

No comments

Epson Stylus Pro Original User Manual Page 3