Epson Stylus Pro XL Service Manual Page 87
- Page / 127
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Angular spacers for the color head come in five thicknesses, each having its own shape. The
following figure shows the relationship between the shape and thickness. Since the color head is
not equipped with a linear spacer, the angle adjustment is decided only by the angular spacer
(specifically designed for the color head), which is placed under the left side of the head base.
4. In Figure 4-13, pay attention to the position of A and B while you reset the left angular spacer.
The replacement procedure is explained beginning in step 5.
5. Turn off the printer now.
6. Move the carriage to the center manually, and loosen (but do not remove) the screw securing
the color head to the carriage.
0.30
0.35
0.40
0.45
0.50
Angular Spacer (for Color Head)
Spacer Name
Thickness
Shape
angular spacer YMC
angular spacer YMC-B
angular spacer YMC-C
angular spacer YMC-D
angular spacer YMC-E
Figure 4-14. Relationship between the Shape and Thickness
(A) (B) (A) (B)
Check
positions A, B
Position A, B
Position A, B
Replace the right
angular spacer
with a thicker one.
Replace the right
angular spacer
with a thinner one
Magenta
Cyan
Magenta
Cyan
Figure 4-15. Spacer Selection
Stylus Pro XL Adjustments
Rev. A 4-13
- SERVICE MANUAL 1
- Chapter 1 Product Description 2
- 1.1 FEATURES 4
- Table 1-1. Interface Cards 5
- 1.2 SPECIFICATIONS 6
- Table 1-3. Character Tables 7
- 1.2.3 Paper Specifications 8
- Printable area: Cut sheets 9
- Envelopes 9
- 1-6 Rev.A 9
- Cut Sheets Envelopes 10
- Carriage Unit 10
- : Without condensation 11
- 1.2.7 Reliability 12
- 1.2.8 Safety Approvals 12
- 1.2.9 Physical Specifications 12
- 1.3 INTERFACE SPECIFICATIONS 13
- 1.4 OPERATIONS 16
- Indicators 17
- 1.4.3 Default Settings 18
- 1.4.3.1 Default Setting Items 18
- Table 1-17. Feature Selection 19
- Operate LED Data LED 20
- 1.4.4 Error Conditions 21
- Table 1-19. Error Indications 21
- 1.4.5 Printer Initialization 21
- 1.5 MAIN COMPONENTS 22
- 1.5.5 Housing 24
- Table of Contents 25
- List of Figures 26
- List of Tables 26
- 2.1 OVERVIEW 27
- 2.2.1 Printer Mechanism 28
- Micro Dot Printing mode 30
- CR Motor 31
- CR HP Sensor 31
- Carriage Guide Shaft 31
- Belt Pulley 31
- 2.2.3 Paper Feed Mechanism 32
- Table 2-5. Drive Terms 33
- 2.2.4 Ink System 34
- Drive: Pump Mechanism 35
- Drive: Switch Lever Set 35
- Drive: Paper Feed Mechanism 36
- Switch Lever: Reset 36
- Figure 2-12. Pump Operation 37
- 2.2.7 Wiping Mechanism 38
- 2.3.2.1 Reset Circuits 42
- 2.3.2.2 Sensor Circuits 42
- STROBE pulse 44
- 2-18 REV.-A 44
- Normal Dot Mode 46
- Drive Waveform 46
- Micro Dot Mode 46
- Block Resistor 46
- Micro Dot Printing Mode 47
- 2.3.2.6 DMA Controller 48
- CPU H8 (IC1) DRAM (IC5) 49
- 2.4 INK SYSTEM MANAGEMENT 50
- 2.4.1 Ink Operations 51
- 2.4.2.1 Protect Counter 53
- 3.1 OVERVIEW 56
- ATTENTION 56
- 3-2 REV.-A 57
- DISASSEMBLY/ASSEMBLY POINT 58
- C137 PNL Board 58
- Carriage Lock Lever 58
- CBB (M3x11) 58
- CBS (M3x8) 59
- C162 MAIN Board 59
- CBB (M3x12) 59
- ASSEMBLY POINT 61
- REQUIRED ADJUSTMENT 61
- Ink Cartridge 63
- Fixing Lever 63
- Cartridge Holder 63
- Figure 3-9. Printhead Removal 64
- 3.2.5.2 Carriage Unit Removal 67
- 3.2.5.3 Pump Unit Removal 68
- Cleaner Lever 69
- 3.2.5.5 CR Motor Removal 70
- 3.2.5.6 PF Motor Removal 70
- 3.2.5.8 PE Sensor Removal 71
- Paper Feed Roller 72
- 3.2.5.10 Upper Frame Removal 73
- Chapter 4 Adjustments 74
- 4.1 OVERVIEW 75
- Adjustments Stylus Pro XL 76
- Stylus Pro XL Adjustments 77
- Head Base 79
- Figure 4-5. Spacer Selection 80
- Spacer Name 87
- Thickness 87
- Figure 4-15. Spacer Selection 87
- 4.1.7 Platen Gap Adjustment 90
- Chapter 5 Troubleshooting 92
- Rev.-A 5-i 93
- 5.1 OVERVIEW 94
- Table 5-3. Error Codes 95
- 5.2.2 Error is detected 98
- Stylus Pro XL Troubleshooting 100
- Troubleshooting Stylus Pro XL 101
- Chapter 6 Maintenance 108
- 6.1 PREVENTIVE MAINTENANCE 109
- 6.2 SERVICE MAINTENANCE 110
- 6.3 LUBRICATION AND ADHESIVES 111
- 6-4 Rev.A 112
- Rev.A 6-5 113
- 6-6 Rev.A 114
- Appendix 115
- A.1 CONNECTOR SUMMARY 116
- Table A-1. Connector Summary 117
- Stylus Pro XL Appendix 118
- Appendix Stylus Pro XL 119
Related products and manuals for Print & Scan Epson Stylus Pro XL
Print & Scan Epson NPD4919-00 EN User's Guide
(137 pages)
(137 pages)
Print & Scan Epson MX-80II F/T User Manual
(24 pages)
(24 pages)
Print & Scan Epson KM-2550 User Manual
(6 pages)
(6 pages)
Print & Scan Epson TM-T20II User Manual
(20 pages)
(20 pages)
Print & Scan Epson LQ-850X User Manual
(23 pages)
(23 pages)
Print & Scan Epson WF-2630 User Manual
(142 pages)
(142 pages)
Print & Scan Epson TM-T70 User Manual
(17 pages)
(17 pages)
Print & Scan Epson SP4880CB User Manual
(6 pages)
(6 pages)
Print & Scan Epson AP-4000 User Manual
(6 pages)
(6 pages)
Print & Scan Epson WF-5191 User's Guide
(123 pages)
(123 pages)
Print & Scan Epson PRO4000 User Manual
(7 pages)
(7 pages)
Print & Scan Epson TM-C3400 Specifications
(213 pages)
(213 pages)
Print & Scan Epson TM-P60 Specifications
(12 pages)
(12 pages)
Print & Scan Epson Stylus Pro 7710 User Manual
(203 pages)
(203 pages)
© 2020, manymanuals.com. All rights reserved. | 2.068 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals