Epson T-750 User Manual download pdf (Page 140)

Table D-I.

DIP

switch group 1

Switch

number Function

l-l

Select condensed or normal

characters

1-2

Select slashed or unslashed zero

1-3

Select character table*

1-4

Select printer commands

1-5

l-6

l-7

Select print quality

Select international character set

1-8

In IBM printer emulation mode, a CR is added to an 1

or ESC J if this switch is OFF

Action

when ON when OFF

Condensed

Normal

Graphics Italics

IBM printer

ESC/P

emulation

mode

NLQ

Draft

See Table D-3

Table D-2. DIP switch group 2

Switch

Action

number

Function

when ON

when OFF

2-1

1 Select page length

12 inch

11 inch

2-2

2-3

2-4

Select automatic sheet feeder Selected

Not selected

mode

1 Skip-over-perforation

1 inch

None

1 Add line feed after carriage return

CR + LF

CR only

Note: The factory setting for all switches except l-6, l-7, and l-8 is OFF

International Character Sets

Thirteen international character sets are available in Epson mode.

Eight of these are selected by DIP switches l-6 to l-8 and the remaining

five (Japan, Norway, Denmark II, Spain II and Latin America) can be

selected with the ESC R command, which is described in the

Command Summary. For the characters available in each character set,

see Appendix B.

In IBM printer emulation mode, you can select only two character

sets; the standard character set (Table 1) and the international

character set (Table 2). You can see the differences by looking at the

IBM character tables in Appendix B. There is also a command to let

you print any of the characters in the international character set and

several additional characters. Together these form the symbol set. The

Defaults and DIP Switches

D-3

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 155 156

Comments to this Manuals

No comments

Epson T-750 User Manual Page 140

Comments to this Manuals

Related products and manuals for Print & Scan Epson T-750