Epson WorkForce WF-2660 User's Guide download pdf (Page 39)

You can select one of these modes to communicate with your computer or device:

Access point mode

The product itself acts as the network access point for up to 4 devices. When operating in this mode,

your product displays an AP connection symbol on the LCD screen.

Peer-to-peer mode

The product communicates one-to-one with another Wi-Fi Direct capable device. When operating in

this mode, your product displays a Direct or D connection symbol on the LCD screen.

To disconnect a peer-to-peer mode connection, release the connection to your product from your

computer or other device.

To enable peer-to-peer mode, you must select it from the Web Config Utility, under Advanced

Settings > Services > Wi-Fi Direct.

Enabling Wi-Fi Direct Mode

Parent topic: Wi-Fi or Wired Networking

Enabling Wi-Fi Direct Mode

You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or

other devices without a wireless router or access point.

1. Press the home button, if necessary.

2. Select Setup.

3. Select Network Settings.

4. Select Wi-Fi Setup.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 304 305

No comments

Epson WorkForce WF-2660 User's Guide Page 39