Epson XP-820 User's Guide Page 331

  • Download
  • Add to my manuals
  • Print
  • Page
    / 388
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 330
If you are connecting the product via Wi-Fi Protected Setup (WPS) and the Wi-Fi icon on your
product's LCD is not lit, make sure you select one of the WPS options from the product control panel
within 2 minutes of pressing the WPS button on your router.
Check your wired LAN router or access point to see if the LED for the port to which your product is
connected is on or flashing . If the link LED is off, try the following:
Make sure the Ethernet cable is securely connected to your product and to your router, access
point, switch, or hub.
Try connecting your product to a different port or a different router, access point, switch, or hub.
Try connecting with a different Ethernet cable.
Try printing to your product from another computer on the network.
If you are connecting the product via EpsonNet Setup and the Wi-Fi icon does not appear lit on the
LCD, make sure your product software was installed correctly. If necessary, reinstall your software.
Parent topic: Solving Network Problems
Related concepts
When to Uninstall Your Product Software
Related tasks
Printing a Network Status Sheet
Cannot Scan Over a Network
If you cannot start Epson Scan for scanning over a network, try these solutions:
If you cannot scan from your product control panel, make sure you restarted your computer after
installing the product software. Make sure the Event Manager program is not being blocked by your
firewall or security software.
If you are scanning a large original at a high resolution, a network communication error may occur. Try
scanning again at a lower resolution.
If network communication was interrupted while starting Epson Scan, exit Epson Scan, wait a few
seconds, and restart it. If Epson Scan cannot restart, turn off your product, turn it back on, and try
restarting Epson Scan again.
Check the connection setting and test the connection using Epson Scan Settings:
Windows 8.x: Navigate to the Apps screen and select EPSON Scan Settings. Make sure the
Connection setting is set to Network, then click the Test button.
331
Page view 330
1 2 ... 326 327 328 329 330 331 332 333 334 335 336 ... 387 388

Comments to this Manuals

No comments