Epson AcuLaser C9300 User Manual download pdf (Page 62)

4. Confirm the information about the printer’s port you want to configure, and then click Finish.

Items Explanations

Port Type The following items are listed in the pull-down menu, and you can select the port

type you need.

IP Address (Auto): Configure the port automatically. If the IP address of the

printer is acquired automatically and the computer and the printer are in the same

segment, you can select this port type.

IP Address (Manual): Use the printer’s IP Address for the port name.

HostName (DNS): Use the printer’s host name registered in the DNS server for the

port name.

MS Network: Use the NetBIOS name registered in the printer for the port name.

The port Information The following items are displayed:

- Port Name (If the port type is changed, the port name and the host name or IP

address are also changed.)

- Printer Model

- Host Name or IP Address

- Protocol

Finish button Register the port information to the system and close the Add EpsonNet Print Port

Wizard.

Back button Go back to the printer list window.

Cancel button Close the Add EpsonNet Print Port Wizard.

The new printer port is created in your computer. To install the printer driver, see “Installing the

Printer Driver” on page 65.

Epson Network Guide

Network Software 62

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 91 92

No comments

Epson AcuLaser C9300 User Manual Page 62