Epson AcuLaser C9300 User Manual download pdf (Page 76)

The Model Name and IP Address do not appear in the EpsonNet Config dialog

box.

Cause What to do

If the valid IP address is not set, the items

indicated in the dialog box mentioned above

may not appear.

Set a valid IP address.

Refresh the status by selecting Refresh from the View menu.

Increase the length of time before a timeout. To do this, select Options

from the Tool menu, and then select Timeout. Note that doing so can

cause EpsonNet Config to run more slowly.

An extra account is generated when using the dial-up network.

Cause What to do

NetWare is set to Enable even though you

are not using NetWare.

Set NetWare to Disable on the NetWare screen of EpsonNet Config

with Web Browser.

How to acquire an IP address.

To acquire your IP address, you need to apply to the NIC (Network Information Center) in your country.

Printing a Network Status Sheet

Before you start configuring the network interface, be sure to print a network status sheet that contains

important information such as the current configuration and the MAC address of the network

interface.

To print a network status sheet, follow the steps below.

Note:

You cannot print a status sheet using the steps below if your printer does not have an LCD panel. See the

User’s Guide on how to print the status sheet.

1. Press the Right button on the printer’s control panel once to enter the SelecType mode. The LCD

panel displays Information Menu.

2. Press the Right button.

3. Press the Down button until Network Status Sheet appears on the LCD panel.

Epson Network Guide

Troubleshooting 76

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 91 92

No comments

Epson AcuLaser C9300 User Manual Page 76