Epson 52C Troubleshooting Guide download pdf (Page 7)

EPSON PowerLite 52c Projector

6 - EPSON PowerLite 52c Projector 11/02

2. To turn off the projector, press the red

Power button on the

projector or remote control. You see a confirmation message.

(If you don’t want to turn it off, press any other button.)

3. Press the

Power button again. The power light flashes

orange for about 45 seconds as the projector cools down.

When the projector has cooled, the orange light stays on and

the exhaust fan shuts off.

If you want to turn the projector on again, wait until the

orange light stops flashing. Then press the

Power button.

4. Replace the lens cap and unplug the power cord.

Caution: To avoid damaging the projector or lamp,

never unplug the power cord when the power light

is green or flashing orange.

5. Retract the front feet as shown.

6. If you’re using a VCR or other video source, turn it off after

you turn off the projector.

7. Disconnect all equipment, and store the projector in the soft

case that came with it or in a protective case.

Projector Status Lights

The lights on top of the projector indicate the projector’s

status and let you know when a problem occurs.

If the projector is not working correctly, first turn it off and

unplug it. Then plug the power cord back in and turn on the

projector. If this does not solve the problem, check the status

lights on top of the projector and try the solutions below.

Power

Power indicator

Warning indicator

Power

light

Warning

light Status

Description and

action

Green Off Operating The projector is

operating normally.

Flashing

green

Off Warming up The projector is

warming up. Wait for

the image to appear.

Green Flashing

orange

Lamp

warning

The lamp is almost

burned out. This is a

good time to replace it.

See page 8.

Orange Off Sleep mode The projector is in sleep

mode. You can unplug it

or press the P Power

button to turn it on.

Flashing

orange

Off Cooling

down

The projector is cooling

down. Wait for the light

to become solid before

unplugging it.

Flashing

orange

Flashing

orange

(quickly)

High

temperature

warning

The projector is too hot.

Make sure the room

temperature is not

above 95 °F and there is

plenty of space around

and under the projector

for ventilation. Clean the

air filter, if necessary.

See page 8.

Flashing

red

Flashing

red

(quickly)

Lamp failure The lamp is burned out.

Replace it as described

on page 8.

Flashing

red

Flashing

red

Internal error There is an internal

error in the projector.

Turn the projector off

and unplug it. Contact

EPSON for help.

Red Flashing

red

Fan error/

Temperature

sensor error/

Lamp error

There is a problem with

the cooling fan,

temperature sensor, or

lamp. Turn off the

projector and unplug it.

Contact EPSON for help.

Off Red Overheating The projector has

overheated and turned

itself off. Let it cool for a

few minutes, then turn it

back on. Make sure

there is plenty of space

around and under the

projector for ventilation.

If it continues to

overheat, change the air

filter. See page 8.

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Epson 52C Troubleshooting Guide Page 7

Comments to this Manuals

Related products and manuals for Projectors Epson 52C