Epson 821p User Manual download pdf (Page 27)

Setting Up the Projector 27

Playing Sound Through the Projector

The projector has a built-in speaker with a maximum output of 5 W.

You can play sound from your video equipment through the

projector’s speaker if your video device has an audio output port.

For RCA-Style Audio Output Ports

Most video devices have an RCA-style audio output port. In this case,

use the audio adapter supplied with the projector to connect the

projector to a commercially-available A/V cable, as shown below:

1. Locate the audio adapter that came with your projector.

2. Connect the black audio plug on one end of the adapter to the

Audio jack corresponding to your video source. For example, if

you’ve connected your video device to the projector’s

Video port,

connect the adapter to the

Audio jack next to it.

3. Connect the red and white plugs on the other end of the adapter

to the red and white plugs on the A/V cable.

4. Connect the red or white plug on the other end of the A/V cable

to the corresponding color-coded audio output port on your

video source.

If you don’t need to make any other connections, you can plug in

your projector and turn it on. See page 30 for instructions.

Audio adapter

note

Each input port has its own

dedicated audio input jack.

To play sound from a source,

you must connect the audio

cable to the correct audio

input jack.

When you switch the video

source, the projector

automatically plays sound

from the new source.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 111 112

No comments

Epson 821p User Manual Page 27