Epson 821p User Manual download pdf (Page 86)

86 Solving Problems

■ If you’re projecting from a composite or S-video source, check the

Video Signal setting in the Signal menu. In most cases, leave it

set at

Auto. If you’re using a 60-Hz PAL video source, change this

setting to

PAL60. See page 57 for details.

■ Make sure the cables are securely connected at both ends.

■ If you’re projecting from a computer, select the correct resolution;

see “Compatible Computer Display Formats” on page 97.

■ If you’re projecting from a computer, press the Auto button on

the remote control or the

Enter button on the projector to adjust

tracking and sync automatically. If that doesn’t work, try

adjusting the

Sync and Tracking settings in the Signal menu. See

page 56.

The image is blurry.

■ Adjust the focus using the focus ring.

■ Make sure the lens cap is off.

■ There may be dirt or smears on the lens. Clean the lens as

described on page 70.

■ Make sure the lens is not fogged by condensation. You may need

to wait before using the projector after moving it from a cold

environment.

■ Make sure the projection distance is within the range described on

page 14.

■ Adjust the Sharpness setting on the Image menu (see page 54).

You should be able to see the effect on the screen immediately.

■ Adjust the Brightness and Contrast settings in the image menu;

see page 54.

note

If you turn on Auto

Keystone

in the Setting

menu (see page 58) or change

the

Sharpness setting in the

Image menu (see page 54),

you may have trouble

adjusting the focus using the

ocus ring. Reset these settings

to their default values if you

want to use the focus ring; see

page 68.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 111 112

Comments to this Manuals

No comments

Epson 821p User Manual Page 86

Comments to this Manuals

Related products and manuals for Projectors Epson 821p