Epson 821p User Manual download pdf (Page 72)

72 Maintaining and Transporting the Projector

4. If you need to replace the filter, slide it off, as shown.

5. Align the new filter carefully as you slide it into place. It should

click into place.

Replacing the Lamp

The projection lamp typically lasts for about 2000 hours of use

(in high brightness mode) or 3000 hours (in low brightness mode). It

is time to replace the lamp when:

■ The projected image gets darker or starts to deteriorate.

■ The lamp light is flashing orange.

■ The message Replace the Lamp appears on the screen when the

lamp comes on. Replace the lamp as soon as possible. If you

continue to use the lamp after you see this message, there is a

greater possibility of the lamp breaking.

note

You can check to see how

many hours the lamp has

been used. See page 61.

Turn the projector off when

not in use. Continuous

24-hour-a-day use may

reduce the overall life of this

roduct.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 111 112

No comments

Epson 821p User Manual Page 72