Epson EH-R2000 User's Guide download pdf (Page 49)

Configuration Menu Functions

Configuration Menu

Soft keyboard operations

The Network menu contains items that require input of alphanumerics during setup. In this case,

the following software keyboard is displayed. Use w y z x or K to move the cursor to the

desired key, and then press v to enter the alphanumeric. After inputting, press [Finish] on the

keyboard to confirm your input. Press [Cancel] on the keyboard to cancel your input.

Each time the [CAPS] key is selected, it sets and changes between upper case and lower case

letters.

Each time the [SYM1/2] key is selected, it sets and changes the symbol keys for the section

enclosed by the frame.

"Reset" menu

This resets all configuration menu settings to their default settings. The "Component" and "Language"

settings in the "Settings" menu and the "Memory" settings are not reset when the "Reset All" command

is used.

Settings for the "Network" menu are not reset when the "Reset All" command is used. (EH-R4000 only)

This resets (erases) all settings that have been made using the "Save Memory".

This resets (erases) all settings that have been made using the "Save Lens Position".

Clear the cumulative lamp operating time and reset to "0H". Perform this procedure when you replace

the lamp.

Reset All

Reset Memory

Reset Lens Position

Reset Lamp Hours

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 85 86

No comments

Epson EH-R2000 User's Guide Page 49