Epson EH-R2000 User's Guide download pdf (Page 53)

Advanced Functions

Operating from a Computer (EH-R4000 Only)

Changing Settings Using a Web Browser (Web Control)

You can set up and control the projector from a computer by using the Web browser of a computer

that is connected to the projector via a network. Setup and control operations can be performed

remotely if this function is used. In addition, since you can use the computer's keyboard, entering

characters required for the setup is easier.

Use Microsoft Internet Explorer 6.0 or later as the Web browser. If using a Macintosh, you can also

use Safari. If, however, you are using Safari under Mac OS X 10.2.8, some of the Web control radio

buttons may not display properly.

Connecting a LAN Cable

Connect with a commercially available 100BASE-TX or 10BASE-T LAN cable.

To prevent malfunctions, use a category 5 shielded LAN cable.

Displaying Web Control

Use the following procedure to display Web Control.

Entering the IP address of the projector

Web Control can be opened by specifying the IP address of the projector as follows.

Start the Web browser on the computer.

Enter the IP address of the projector in the address input box of the Web

browser, and press the [Enter] key on the computer's keyboard.

Web Control is displayed.

When "

Web Control Password

" is set in the "

Network

" menu from the projector's

Configuration Menu, enter the password. Enter the character set for the "Web Control

Password" as the password. p.45

You can make settings or control the projector from a Web browser even while the

projector is in standby mode by setting "Standby Mode" in the "Settings" menu of

the projector to "Communication On".

If your Web browser is set up to connect via a proxy server, Web Control cannot be

displayed. To use Web Control, you need to make network connection settings with

a device other than a proxyserver.

TIP

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 85 86

No comments

Epson EH-R2000 User's Guide Page 53