Epson Expression 1680 User Manual download pdf (Page 104)

Using Optional Equipment

Removing the Shipping Screw

To prevent damage during shipping, a shipping screw is attached to the transparency

unit to secure its lamp assembly. You must remove this screw before using the

transparency unit.

1. Turn the transparency unit so the glass side faces up.

2. Use a Phillips head (cross

head) screwdriver to remove

the shipping screw from the

hole labeled

CLAMP

, as

shown at right.

3. Install the screw in the

storage hole labeled

STOCK

Before transporting the scanner, remove the transparency unit, reinstall the shipping

screw in the hole labeled

CLAMP

, and slide the transportation lock on the back of the

scanner to the

LOCK

position. See “Transporting the Scanner” on page 111 for

instructions.

Installing the Transparency Unit

Follow these steps to install the transparency unit on the scanner.

1. Make sure the scanner is turned off. Then unplug the power cable from the

scanner.

2. Remove the document

cover by grasping the back

of the document cover and

easing the cover up.

3. Make sure the document

table is clean and dust free.

1680.book Page 97 Thursday, March 1, 2001 4:28 PM

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 158 159

No comments

Epson Expression 1680 User Manual Page 104