Epson ELPLP29 User Manual download pdf (Page 50)

Troubleshooting > When You Suspect a Problem

f Vertical stripes appear in the image

f Image is distorted / Image contains interference

• Has the "Trackingg" setting been adjusted?

Set the tracking value until the vertical stripes disappear. ([Menu] button

"Image" → "Picture Quality" → "Tracking") s "Image menu" P.35

• Have the "Sync.g", "Trackingg" and

"Position" settings been adjusted correctly?

If the configuration menu "Image" → "Auto Setup" setting has been set to

"OFF", press the [Auto] button on the remote control to adjust these

settings. If the images have not been correctly adjusted after pressing the

[Auto] button and using the automatic setup function, adjust the settings

manually in their respective menus. ([Menu] button → "Image" → "Picture

Quality" → "Sync.") s "Image menu" P.35

• Are the image signal format settings

correct?

• When a computer or Component Videog equipment is connected, select

the appropriate setting for the input source you are using, in the "Image"

→ "Input Signal" configuration menu.

• When Composite Videog or S-Videog equipment is connected, select

the appropriate setting for the video system you are using in the

"Setting" → "Video Signal." configuration menu.

• Has the correct resolution been selected?

Set the computer so that the signals that are output are compatible with

this projector. Refer to your computer's documentation for further details.

s "Supported Display Resolutions" P.67

• Is an extension cable being used?

If using an extension cable, electrical interference may affect the signals.

Confirm that you are using a shielded cable.

• Are the cables connected correctly?

s "Connecting to a Computer" P.12, "Connecting to Video Equipment"

P.18

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 74 75

No comments

Epson ELPLP29 User Manual Page 50