Epson ELPLP29 User Manual download pdf (Page 59)

Appendices > Projector Care

Loosen the fixing screws holding the lamp in place.

Remove the old lamp.

Install the new lamp.

Press the lamp until it clicks into place, then tighten the two fixing

screws.

Replace the lamp cover.

First insert the tabs, and then press down on the opposite side until it

clicks into place.

• Install the lamp securely. If the lamp cover is removed, the

lamp turns off automatically as a safety precaution. The

lamp will not turn on if the lamp or the lamp cover is not

installed correctly.

• After replacing the lamp, be sure to reset the lamp

operating time.

• New air filters are included with replacement lamps. The

air filter should also be replaced when the lamp is replaced.

s "Lamp replacement period" P.57

• The lamp contains mercury. Dispose of used lamps

properly in accordance with your local regulations.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 74 75

No comments

Epson ELPLP29 User Manual Page 59