Epson Stylus Photo 825 Ink Jet Printer User Manual download pdf (Page 76)

Maintaining Your Printer

Transporting the Printer

If you move your printer some distance, you need to prepare it for transportation in

its original box or a similar one. Follow these steps:

Caution:

To avoid damage, always leave the ink cartridges installed when

transporting the printer.

1. Turn on the printer, wait until the print head locks in the far right position, then

turn off the printer.

2. Unplug the power cord from the electrical outlet. Then disconnect the printer

cable from the printer.

3. Remove any paper from the printer and remove the paper support.

4. Open the printer cover. If you still have the

packing insert, slide it down into the area

beside the ink cartridge holder and tape it to

the printer case. If you don’t have the insert,

just tape the cartridge holder to the printer

case. Then close the printer cover.

5. Push in the output tray extension and close the tray.

6. Repack the printer and its attachments in the original box using the protective

materials that came with them.

Keep the printer level as you transport it.

After transporting the printer, remove the tape securing the print head and test your

printer. If you notice a decline in print quality, clean the print head (see page 61); if

output is misaligned, align the print head (see page 68).

Tape the ink cartridge

holder to the printer case

Caution:

Be sure to remove the tape

and packing insert after installing the

printer in its new location.

VSEDVLFVERRN3DJH:HGQHVGD\-XO\30

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 119 120

No comments

Epson Stylus Photo 825 Ink Jet Printer User Manual Page 76