Epson NX Specifications download pdf (Page 94)

OTHER PRINTER CONTROL COMMANDS

Set MSB to 7

Mode ASCII Decimal Hexadecimal

Both <ESC>

“ > ”

27 62 1B 3E

Sets the most significant bit of each subsequent byte received to 1, allowing

users with a 7-bit interface to access characters with ASCII codes greater

than 127.

Set MSB to 0

Mode

ASCII Decimal Hexadecimal

Std.

<ESC> “=”

27 61 1B 3D

IBM

<FS> “c”

28 61 IC 3D

Sets the most significant bit of each subsequent byte received to 0.

Accept MSB as is

Mode

1 ASCII 1 Decimal Hexadecimal

Both I

<ESC>

“#”

127 35 IlB 23

Cancels the preceding commands and accepts the most significant bit as

it is sent to the printer.

Delete last character sent

Mode 1 ASCII I Decimal Hexadecimal

Both

<DEL> 127 7F

Deletes the last character received. Ignored if the last character received

has already been printed, or if the last character received was all or part

of a command.

Cancel last line

Model ASCII

I Decimal

Both I <CAN> 1 24

I Hexadecimal

1 18

Deletes the last line currently present in the print buffer.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 122 123

No comments

Epson NX Specifications Page 94