Epson 2000P User Manual download pdf (Page 40)

Printing on Paper Cut from a Roll

If you want to print on paper cut from a roll without using the roll paper holder,

follow these steps:

1. Before loading the paper, cut it to the

desired length of your image plus two inches

for the necessary margins. Cut the edge

cleanly, at a 90-degree angle in each corner,

to ensure proper loading.

If you alter the paper’s width

before printing, you may not be able

to print edge-to-edge; marginless printing is available

only at certain paper widths (4, 8.3, 8.5, and 12.95 inches).

2. To make loading easier, roll the

first several inches of the paper

backward to uncurl it. Use the

plastic sheet included with your

printer to prevent your hands from

marring the printable surface. (Or

you can just use a folded sheet of

paper.)

3. Remove the printer’s paper support and

insert the cut sheet, printable side up, as far

as it will go. Slide the left edge guide

against the paper.

Pbasics.book Page 35 Wednesday, November 29, 2000 5:46 AM

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 76 77

No comments

Epson 2000P User Manual Page 40