Epson EMP-82 User's Guide download pdf (Page 53)

Problems Solving

Image colours are not right

Images appear dark

Check Remedy

Do the input signal settings match the

signals from the connected device?

If a composite videog or S-Videog source is connected to the projector, use the "Video Signal" menu

command to select the video signal format.

"Signal" - "Video Signal" s page 35

Has the image brightness been adjusted

correctly?

Use the "Brightness" menu command to adjust the brightness. "Image" - "Brightness" s page 33

Are the cables connected correctly? Check that all of the cables required for projection are securely connected.

Has the image contrastg been adjusted

correctly?

Use the "Contrast" menu command to adjust the contrast. "Image" - "Contrast" s page 33

Has the colour been adjusted correctly? Use the "Color Adjustment" menu command to adjust the colour. "Image" - "Color Adjustment"

s page 33

Have the colour saturation and tint been

adjusted correctly?

Use the "Color Saturation" and "Tint" menu commands to adjust the colour and tint. "Image" - "Color

Saturation", "Tint" s page 33

Check Remedy

Have the image brightness and luminance

been adjusted correctly?

Use the "Brightness" and "Brightness Control" menu commands to adjust the brightness and luminance.

"Image" - "Brightness" s page 33 "Settings" - "Brightness Control" s page 36

Has the image contrastg been adjusted

correctly?

Use the "Contrast" menu command to adjust the contrast. "Image" - "Contrast" s page 33

Is the lamp due for replacement? When the lamp is nearly due for replacement, the images will become darker and the colour quality will

become poorer. When this happens, the lamp should be replaced with a new one. s page 59

Only when projecting images

from a video source

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 79 80

No comments

Epson EMP-82 User's Guide Page 53